TM 5-3805-293-23-2
0031
Table 1. Implement Code (2200-00 TO 2954-14) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2212-03 Auxiliary Valve #1
5. Using digital multimeter, test for
Continuity - Proceed to Test Step 3.
Port B Solenoid Voltage
continuity between harness con-
No Continuity - Replace implement 2
Above Normal - Continued
nector P-C45 (WP 0009, Figure
ECM (WP 0268).
72) terminal 58 and all other ter-
Connect front attachment harness
minals on harness connector P-
connector U-C14 (WP 0009, Figure
C45.
244) to auxiliary valve #1 port B
There should be no continuity.
(scarifier lower) solenoid (WP 0009,
Figure 245), and install front frame
nose cover (WP 0224).
Proceed to step 6.
6. Using MSD (WP 0006), select
2212-03 Code Active - Repeat
Implement 120M and verify 2212- troubleshooting code from the
03 is active.
beginning.
2212-03 Code Not Active -
Troubleshooting complete.
Test Step 3. Test Cab Lower Wiring
Harness.
1. Disconnect front attachment har-
ness connector U-C1 (WP 0009,
Figure 121) from cab lower har-
ness connector P-C50 (WP 0009,
Figure 120).
2. Using digital multimeter, test for
Continuity - Replace cab lower wiring
continuity between harness con-
harness (WP 0266).
nector P-C45 (WP 0009, Figure
Connect front attachment harness
72) terminal 58 and all other ter-
connector U-C14 (WP 0009, Figure
minals on harness connector P-
244) to auxiliary valve #1 port B
C45.
(scarifier lower) solenoid (WP 0009,
There should be no continuity.
Figure 245), and install front frame
nose cover (WP 0224).
Proceed to step 3.
No Continuity - Replace front
attachment wiring harness (WP
0180).
Connect cab lower harness connector
P-C45 (WP 0009, Figure 72) to
implement 2 ECM J1 (WP 0009,
Figure 73).
Proceed to step 3.
3. Using MSD (WP 0006), select
2212-03 Code Active - Repeat
Implement 120M and verify 2212- troubleshooting code from the
03 is active.
beginning.
2212-03 Code Not Active -
Troubleshooting complete.
0031-115