TM 5-3805-293-23-2
0031
Table 1. Implement Code (2200-00 TO 2954-14) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2200-04 Left Steering Cylin-
No Continuity - Front chassis wiring
der Position Sensor Voltage
harness is shorted, replace front
Below Normal - Continued
chassis wiring harness (WP 0180).
Connect the steering position sensor
harness UA-C2 (WP 0006, Figure
192) to left steering position sensor
(WP 0006, Figure 193) (WP 0169).
Connect the cab lower wiring harness
connector P-C39 (WP 0006, Figure
70) to implement ECM J-2 (WP 0006,
Figure 71) (WP 0268).
Connect the cab lower wiring harness
connector P-C41 (WP 0006, Figure
68) to implement ECM J-1 (WP 0006,
Figure 69) (WP 0268).
Connect the rear chassis wiring
harness connector FA-C21 (WP 0006,
Figure 124) to transmission ECM J2
(WP 0006, Figure 112).
Connect the rear chassis wiring
harness connector FA-C20 (WP 0006,
Figure 113) to transmission ECM J1
(WP 0006, Figure 112).
Proceed to step 3.
3. Using the MSD (WP 0006), select 2200-04 Code Active - Repeat
Implement 120M and verify 2200- troubleshooting code from the
04 is not active.
beginning.
2200-04 Code Not Active -
Troubleshooting complete.
0031-29
