TM 5-3805-293-23-2
0029
Table 1. Implement Code (2160-03 TO 2168-13) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2168-05 Circle Right Sole-
7. Using digital multimeter, test for
Resistance 5.0 Ohms or Less -
noid Current Below Normal -
continuity between harness con-
Replace implement 2 ECM (WP
Continued
nector P-C45 (WP 0009, Figure
0268).
72) terminal 50 and terminal 52.
Remove jumper wire from harness
Resistance should be less than
connector P-C50 (WP 0009, Figure
5.0 ohms.
120) terminal 7 and terminal 36.
Connect front attachment harness
connector U-C16 (WP 0009, Figure
252) to circle right solenoid (WP 0009,
Figure 253), and install front frame
nose cover (WP 0224).
Proceed to step 8.
Resistance More Than 5.0 Ohms -
Replace cab lower wiring harness
(WP 0266).
Connect front attachment harness
connector U-C16 (WP 0009, Figure
252) to circle right solenoid (WP 0009,
Figure 253), and install front frame
nose cover (WP 0224).
Proceed to step 8.
8. Using MSD (WP 0006), select
2168-05 Code Active - Repeat
Implement 120M and verify 2168- troubleshooting code from the
05 is active.
beginning.
2168-05 Code Not Active -
Troubleshooting complete.
0029-62