TM 5-3805-293-23-2
0029
Table 1. Implement Code (2160-03 TO 2168-13) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2166-06 Blade Sideshift
Test Step 3. Test Cab Lower
Right Solenoid Current
Harness.
Above Normal - Continued
1. Turn ignition switch and battery
disconnect switch to the OFF
position (TM 5-3805-293-10).
2. Disconnect front attachment har-
ness connector U-C1 (WP 0009,
Figure 121) from cab lower har-
ness connector P-C50 (WP 0009,
Figure 120).
3. Using digital multimeter, test for
Continuity - Replace front
continuity between harness con-
attachment wiring harness (WP
nector U-C1 (WP 0009, Figure
0180).
121) terminal 11 and all other ter-
Proceed to step 6.
minals on harness connector U-
No Continuity - Proceed to step 4.
C1.
There should be no continuity.
4. Disconnect cab lower harness
connector P-C41 (WP 0009, Fig-
ure 68) from implement 1 ECM J1
(WP 0009, Figure 69) (WP 0268).
5. Using digital multimeter, test for
Continuity - Replace cab lower wiring
continuity between harness con-
harness (WP 0266).
nector P-C41 (WP 0009, Figure
Connect front attachment harness
68) terminal 66 and all other ter-
connector U-C46 (WP 0009, Figure
minals on harness connector P-
248) to blade sideshift right solenoid
C41 and to machine ground.
(WP 0009, Figure 249), and install
There should be no continuity.
front frame nose cover (WP 0224).
Proceed to step 6.
No Continuity - Replace implement 1
ECM (WP 0268).
Connect cab lower harness connector
P-C41 (WP 0009, Figure 68) to
implement 1 ECM J1 (WP 0009,
Figure 69).
Connect front attachment harness
connector U-C1 (WP 0009, Figure
121) to cab lower harness connector
P-C50 (WP 0009, Figure 120).
Connect front attachment harness
connector U-C46 (WP 0009, Figure
248) to blade sideshift right solenoid
(WP 0009, Figure 249), and install
front frame nose cover (WP 0224).
Proceed to step 6.
0029-48