TM 5-3805-293-23-2
0029
Table 1. Implement Code (2160-03 TO 2168-13) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2163-06 Blade Right Lower
Test Step 3. Test Cab Lower
Solenoid Current Above
Harness.
Normal - Continued
1. Turn ignition switch and battery
disconnect switch to the OFF
position (TM 5-3805-293-10).
2. Disconnect front attachment har-
ness connector U-C1 (WP 0009,
Figure 121) from cab lower har-
ness connector P-C50 (WP 0009,
Figure 120).
3. Using digital multimeter, test for
Continuity - Replace front
continuity between harness con-
attachment wiring harness (WP
nector U-C1 (WP 0009, Figure
0180).
121) terminal 17 and all other ter-
Connect cab lower harness connector
minals on harness connector U-
P-C41 (WP 0009, Figure 68) to
C1.
implement 1 ECM J1 (WP 0009,
There should be no continuity.
Figure 69).
Proceed to step 6.
No Continuity - Proceed to step 4.
4. Disconnect cab lower harness
connector P-C41 (WP 0009, Fig-
ure 68) from implement 1 ECM J1
(WP 0009, Figure 69) (WP 0268).
5. Using digital multimeter, test for
Continuity - Replace cab lower wiring
continuity between harness con-
harness (WP 0266).
nector P-C41 (WP 0009, Figure
Connect front attachment harness
68) terminal 62 and all other ter-
connector U-C22 (WP 0009, Figure
minals on harness connector P-
236) to blade right lower solenoid (WP
C41 and to machine ground.
0009, Figure 237), and install rear
There should be no continuity.
front frame cover (WP 0224).
Proceed to step 6.
No Continuity - Replace implement 1
ECM (WP 0268).
Connect front attachment harness
connector U-C1 (WP 0009, Figure
121) to cab lower harness connector
P-C50 (WP 0009, Figure 120).
Connect front attachment harness
connector U-C22 (WP 0009, Figure
236) to blade right lower solenoid (WP
0009, Figure 237), and install rear
front frame cover (WP 0224).
Proceed to step 6.
0029-32