TM 5-3805-293-23-2
0027
Table 1. Implement Code (0615-02 TO 2113-04) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2113-03 Operator In-Seat
Switch Voltage Above Nor-
continuity between rear chassis
No Continuity - Proceed to Test Step
mal - Continued
wiring harness connector FA-C20 8.
(WP 0009, Figure 113) terminal
63 and all other FA-C20 terminals.
There should be no continuity.
Test Step 7. Test for Shorted Cab
Lower Wiring Harness.
1. Disconnect the rear chassis wir-
ing harness connector FA-C22
(WP 0009, Figure 47) from cab
lower wiring harness connector P-
C69 (WP 0009, Figure 46).
Continuity - Cab lower wiring
harness is shorted, replace cab lower
ing harness connector P-C69
wiring harness (WP 0266).
(WP 0009, Figure 46) terminal 43
Connect the rear chassis wiring
and all other P-C69 terminals.
harness connector FA-C20 (WP 0009,
There should be no continuity.
Figure 113) to transmission ECM J-1
(WP 0009, Figure 112).
Proceed to step 3.
harness is shorted, replace rear
chassis wiring harness (WP 0188).
Connect the cab lower wiring harness
connector P-C2 (WP 0009, Figure
184) to operator in-seat switch (WP
0009, Figure 185) (WP 0284).
Proceed to step 3.
3. Using the MSD (WP 0006), select
2113-03 Code Active - Repeat
Implement 120M and verify 2113-
troubleshooting code from the
03 is not active.
beginning.
2113-03 Code Not Active -
Troubleshooting complete.
Test Step 8. Test for Shorted Rear
Chassis Wiring Harness.
Continuity - Proceed to Test Step 9.
continuity between rear chassis
No Continuity - Replace implement 1
wiring harness connector FA-C20
ECM (WP 0268).
(WP 0009, Figure 113) terminal
Connect the cab lower wiring harness
64 and all other FA-C20 terminals.
connector P-C2 (WP 0009, Figure
There should be no continuity.
184) to operator in-seat switch (WP
0009, Figure 185) (WP 0284).
Proceed to step 2.
0027-133