TM 5-3805-293-23-2
0026
Table 1. Implement Code (0041-03 to 0600-04) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0041-04 8 Volt DC Supply
17. Using MSD select Implement
0041-04 Becomes Active - Replace
Voltage Below Normal - Con-
120M ECM and monitor diagnos-
right articulation angle position sensor
tinued
tic code 0041-04 while connecting
(WP 0257).
harness connector AT-C4 (WP
Connect harness connector P-C40
0009, Figure 122) to right articula-
(WP 0009, Figure 144) to inching
tion angle position sensor (WP
pedal position sensor (WP 0009,
0009, Figure 123) (WP 0257).
Figure 145) (WP 0257).
Install inching pedal assembly cover
(WP 0290).
Connect harness connector P-C48
(WP 0009, Figure 116) on left hand
joystick J3 (WP 0009, Figure 117).
Install inner panel cover on joystick
support (WP 0282).
Install operator's seat (WP 0284).
Install rear bulkhead cover plate (WP
0266).
Proceed to step 19.
0041-04 is Not Active - Proceed to
step 18.
0026-8
