TM 5-3805-293-23-2
0025
Table 1. Implement Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
WARN I N G
4. Any Implement Moves
with Joystick in Hold
Implements will move during the calibration procedure. Position
Position - Continued
machine away from other objects. Keep personnel away from all imple-
ments. Failure to follow this warning may cause injury or death to per-
sonnel or damage to equipment.
N OT E
The implement being calibrated will beactivated and must detect resis-
tance to the hydraulic force by making contact with the ground. Ensure
affected implement is firmly contacting the ground.
If steering is already aligned, instruct operator to stand up then position
left steering control joystick from the center position and then sit in
operator's seat.
Do not center left steering controljoystick until calibration is complete.
If left steering control joystick is centered, the calibration procedure will
be interrupted, and the implements will be activated.
Read and understand all Warnings
(Figure 3, Item 1). Click on Accept
button (Figure 3, Item 2).
Figure 3. Warning Screen.
0025
