TM 5-3805-293-23-2
0024
Table 1. Window Wipers and Washers Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3. RH Door Wiper Does Not
Test Step 12. Test 530-OR RH Door
Operate Properly - Con-
Washer Circuit for Short to Other
tinued
Terminals in Cab Upper Wiring Har-
ness.
1. Using digital multimeter, test for
No Continuity - Proceed to step 2.
continuity between R-C1 terminal
Continuity - Replace cab upper wir-
24 and all other terminals in R-C1
ing harness (WP 0265).
(WP 0009, Figure 33).
Connect P-C67 (WP 0009, Figure
373) on RH door washer motor (WP
0261).
Install new fuse F15 on fuse box (TM
5-3805-293-10).
Install cover on fuse box (TM 5-3805-
293-10).
Proceed to step 3.
No Continuity - Proceed to Test Step
2. Using digital multimeter, test for
13.
continuity between R-C1 terminal
24 (WP 0009, Figure 33) and
Continuity - Replace cab upper wir-
machine ground.
ing harness (WP 0265).
Connect P-C67 (WP 0009, Figure
373) on RH door washer motor (WP
0261).
Install new fuse F15 on fuse box (TM
5-3805-293-10).
Install cover on fuse box (TM 5-3805-
293-10).
Proceed to step 3.
3. Turn battery disconnect switch
and ignition switch to ON position
(TM 5-3805-293-10).
4. Turn right door wiper/washer con- Right Door Wiper Does Not Work in
One Or More Positions Or Does Not
trol to LOW, HIGH, and PARK
Return To Park - Repeat trouble-
position (TM 5-3805-293-10).
shooting from beginning.
Right Door Wiper Works In Low,
and High Position, and Returns to
Park - Troubleshooting complete.
0024-60
