TM 5-3805-293-23-2
0024
Table 1. Window Wipers and Washers Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3. RH Door Wiper Does Not
10. Turn LH door wiper/washer con-
RH Door Wiper Returns to Park
Operate Properly - Con-
trol to PARK position (TM 5-3805- Position - Proceed to Test Step 15.
tinued
293-10).
RH Door Wiper Does Not Return to
Park Position - Replace RH door
wiper motor (WP 0259).
Disconnect R-C32 (WP 0009, Figure
363) from LH door wiper washer
switch (WP 0274).
Connect R-C32 (WP 0009, Figure
363) on RH door wiper washer switch
(WP 0274).
Connect R-C31 (WP 0009, Figure
367) on LH door wiper washer switch
(WP 0274).
Connect P-C67 (WP 0009, Figure
373) on RH door washer motor (WP
0261).
Inspect fuse F15. If fuse is open,
install new fuse F15 (TM 5-3805-293-
10) on fuse box.
Install cover on fuse box (TM 5-3805-
293-10).
Proceed to step 11.
11. Turn battery disconnect switch
and ignition switch to ON position
(TM 5-3805-293-10).
12. Turn right door wiper/washer con- Right Door Wiper Does Not Work in
trol to LOW, HIGH, and PARK
One Or More Positions Or Does Not
position (TM 5-3805-293-10).
Return To Park - Repeat trouble-
shooting from beginning.
Right Door Wiper Works In Low,
and High Position, and Returns to
Park - Troubleshooting complete.
Test Step 15. Test for Shorted RH
Door Washer Motor.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-293-10).
2. Connect cab lower wiring harness
connector P-C67 (WP 0009, Fig-
ure 373) on RH door washer
motor (WP 0261).
3. Turn battery disconnect switch
and ignition switch to ON position
(TM 5-3805-293-10).
0024-64
