TM 5-3805-293-23-2
0024
Table 1. Window Wipers and Washers Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3. RH Door Wiper Does Not
4. Turn battery disconnect switch
Operate Properly - Con-
and ignition switch to ON position
tinued
(TM 5-3805-293-10).
5. Turn right door wiper/washer con- Right Door Wiper Does Not Work in
trol to LOW, HIGH, and PARK
One Or More Positions Or Does Not
position (TM 5-3805-293-10).
Return To Park - Repeat trouble-
shooting from beginning.
Right Door Wiper Works In Low,
and High Position, and Returns to
Park - Troubleshooting complete.
Test Step 14. Test for Shorted RH
Door Wiper Washer Switch or
Wiper Motor.
1. Install new fuse F15 (TM 5-3805-
293-10) on fuse box.
2. Connect cab lower wiring harness
connector P-C3 (WP 0009, Figure
34) on cab upper wiring harness
connector R-C1 (WP 0009, Figure
33) (WP 0266).
3. Connect wiper wiring harness
connector WJ-C2 (WP 0009, Fig-
ure 366) on RH door wiper motor
(WP 0259).
4. Connect cab upper wiring har-
ness connector R-C13 (WP 0009,
Figure 364) on wiper harness
connector WJ-C1 (WP 0009, Fig-
ure 365) (WP 0265).
5. Disconnect cab upper wiring har-
ness connector R-C31 (WP 0009,
Figure 367) from LH door wiper
washer switch.
6. Connect cab upper wiring har-
ness connector R-C32 (WP 0009,
Figure 363) on LH door wiper
washer switch.
7. Turn battery disconnect switch
and ignition switch to ON position
(TM 5-3805-293-10).
0024-62
