TM 5-3805-293-23-2
0024
Table 1. Window Wipers and Washers Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3. RH Door Wiper Does Not
Test Step 8. Test 200-BK Ground
Operate Properly - Con-
Circuit for High Resistance or Open
tinued
in Cab Lower Wiring Harness.
Resistance 5.0 Ohms or Greater -
1. Using digital multimeter, measure
Replace cab lower wiring harness
resistance between P-C3 terminal
(WP 0266).
14 (WP 0009, Figure 34) and
machine ground.
Connect R-C32 (WP 0009, Figure
363) on RH door wiper washer switch
(WP 0274).
Install cover on fuse box (TM 5-3805-
293-10).
Proceed to step 3.
Resistance Less Than 5.0 Ohms -
Proceed to step 2.
Resistance 5.0 Ohms or Greater -
2. Using digital multimeter, measure
Replace cab lower wiring harness
resistance between P-C3 terminal
(WP 0266).
15 (WP 0009, Figure 34) and
machine ground.
Connect R-C32 (WP 0009, Figure
363) on RH door wiper washer switch
(WP 0274).
Install cover on fuse box (TM 5-3805-
293-10).
Proceed to step 3.
Resistance Less Than 5.0 Ohms -
Connect P-C3 (WP 0009, Figure 34)
on R-C1 (WP 0009, Figure 33) (WP
0266).
Connect R-C32 (WP 0009, Figure
363) on RH door wiper washer switch
(WP 0274).
Install cover on fuse box (TM 5-3805-
293-10).
Proceed to step 3.
3. Turn battery disconnect switch
and ignition switch to ON position
(TM 5-3805-293-10).
4. Turn right door wiper/washer con- Right Door Wiper Does Not Work in
trol to LOW, HIGH, and PARK
One Or More Positions Or Does Not
position (TM 5-3805-293-10).
Return To Park - Repeat trouble-
shooting from beginning.
Right Door Wiper Works In Low,
and High Position, and Returns to
Park - Troubleshooting complete.
0024-56