TM 5-3805-293-23-2
0020
Table 1. Transmission Code (2113-03 TO 2304-06) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2201-02 Right Steering Cyl-
Resistance 5.0 Ohms or Greater -
inder Position Sensor Data
Right steering cylinder position sensor
Erratic, Intermittent or Incor-
harness is open, replace right steering
rect - Continued
position sensor harness (WP 0136).
Connect the front attachment wiring
harness connector U-C1 (WP 0009,
Figure 121) to cab lower wiring har-
ness P-C50 (WP 0009, Figure 120)
(WP 0180).
Connect the cab lower wiring harness
connector P-C39 (WP 0009, Figure
70) to implement ECM J-2 (WP 0009,
Figure 71) (WP 0268).
Connect the cab lower wiring harness
connector P-C41 (WP 0009, Figure
68) to implement ECM J-1 (WP 0009,
Figure 69) (WP 0268).
Connect the rear chassis wiring har-
ness connector FA-C21 (WP 0009,
Figure 124) to transmission ECM J2
(WP 0009, Figure 112).
Connect the rear chassis wiring har-
ness connector FA-C22 (WP 0009,
Figure 47) to cab lower wiring harness
P-C69 (WP 0009, Figure 46).
Proceed to step 3.
3. Using the MSD (WP 0006), select
2201-02 Code Active - Repeat trou-
Trans/chassis 120M and verify
bleshooting code from the beginning.
2201-02 is not active.
2201-02 Code Not Active - Trouble-
shooting complete.
0020-82
