TM 5-3805-293-23-1
0014
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2297-06 Right Front Drive
5. Check for Active code 2297-05 or
Code 2297-06 Remains Active - Pro-
Pump Forward Control Sole-
2297-06 in All Wheel Drive 120M
ceed to Test Step 4.
noid Current Above Normal -
ECM (WP 0006).
Code 2297-06 Becomes Inactive
Continued
and 2297-05 Becomes Active -
Replace filter bypass, pump drive
solenoid wiring harness (WP 0199).
Connect AX-C5 (WP 0009, Figure
106) on right drive pump forward sole-
noid connector (WP 0009, Figure 107)
and close access door.
Install front engine enclosure access
panel (WP 0226).
Proceed to step 5.
6. Using the MSD (WP 0006), select
2297-06 Code Active - Repeat trou-
All Wheel Drive 120M and verify
bleshooting code from the beginning.
2297-06 is not active.
2297-06 Code Not Active - Trouble-
shooting complete.
Test Step 4. Test for Shorted Rear
Chassis Wiring Harness.
1. Turn ignition switch and battery
disconnect switch to the OFF
position.
2. Disconnect rear chassis wiring
FA-C35 harness connector (WP
0009, Figure 15) from cab lower
wiring P-C70 harness connector
(WP 0009, Figure 16) (WP 0188).
3. Disconnect rear chassis wiring
FA-C23 harness connector (WP
0009, Figure 17) from cab lower
wiring P-C71 harness connector
(WP 0009, Figure 18) (WP 0188).
4. Turn battery disconnect switch
and ignition switch to the ON posi-
tion.
0014-86