TM 5-3805-293-23-1
0014
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2293-03 Code Active - Repeat trou-
7. Using the MSD (WP 0006), select
2293-03 Left Front Drive
bleshooting code from the beginning.
All Wheel Drive 120M and verify
Motor Solenoid Voltage
2293-03 is not active.
Above Normal - Continued
2293-03 Code Not Active - Trouble-
shooting complete.
Test Step 2. Test Left Front Drive
Motor Solenoid Circuit for Short to
Other Circuits in Cab Lower Wiring
Harness.
1. Turn ignition switch and battery
disconnect switch to the OFF
position.
2. Disconnect cab lower wiring P-
C35 harness connector (WP
0009, Figure 53) from AWD ECM
J1 (WP 0009, Figure 54) (WP
0270).
3. Disconnect cab lower wiring P-
C37 harness connector (WP
0009, Figure 55) from AWD ECM
J2 (WP 0009, Figure 56) (WP
0270).
4. Using a digital multimeter, test for
No Continuity - Proceed to step 5.
continuity between P-C35 termi-
Continuity - Replace cab lower wiring
nal 58 and all other circuits in P-
harness (WP 0266).
C35 (WP 0009, Figure 53). There
Install rear front frame cover on
should be no continuity.
machine (WP 0224).
Proceed to step 6.
5. Using a digital multimeter, test for
No Continuity - Proceed to Test Step
continuity between P-C35 termi-
3.
nal 58 (WP 0009, Figure 53) and
Continuity - Replace cab lower wiring
all circuits in P-C37 (WP 0009,
harness (WP 0266).
Figure 55). There should be no
Proceed to step 6.
continuity.
6. Using the MSD (WP 0006), select
2293-03 Code Active - Repeat trou-
All Wheel Drive 120M and verify
bleshooting code from the beginning.
2293-03 is not active.
2293-03 Code Not Active - Trouble-
shooting complete.
Test Step 3. Test Left Front Drive
Motor Solenoid Circuit for Short to
Other Voltage Source in Cab Lower
Wiring Harness.
1. Turn battery disconnect switch
and ignition switch to the ON posi-
tion.
0014-3