TM 5-3805-293-23-1
0013
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2188-06 Left All-Wheel Drive
Test Step 5. Test N814-BU Left AWD
(AWD) Clutch Forward Sole-
Clutch FWD Sol Circuit for Short to
noid Current Above Normal -
Implement 2 Circuits in Cab Lower
Continued
Wiring Harness.
1. Disconnect cab lower wiring P-
C45 harness connector (WP
0009, Figure 72) from Implement
2 ECM J1 (WP 0009, Figure 73)
(WP 0268).
2. Disconnect cab lower wiring P-
C27 harness connector (WP
0009, Figure 74) from Implement
2 ECM J2 (WP 0009, Figure 75)
(WP 0268).
3. Using a digital multimeter, test for
No Continuity - Proceed to step 4.
continuity between P-C37 termi-
Continuity - Replace cab lower wiring
nal 2 (WP 0009, Figure 55) and all
harness (WP 0266).
circuits in P-C45 (WP 0009, Fig-
Connect AF-C6 (WP 0009, Figure 80)
ure 72). There should be no conti-
on left AWD clutch forward solenoid
nuity.
(WP 0009, Figure 81).
Install nose front frame cover and rear
front cover on machine (WP 0224).
Proceed to step 5.
4. Using a digital multimeter, test for
No Continuity - Replace AWD ECM
continuity between P-C37 termi-
(WP 0270).
nal 2 (WP 0009, Figure 55) and all
Connect P-C41 (WP 0009, Figure 68)
circuits in P-C27 (WP 0009, Fig-
on Implement 1 ECM J1 (WP 0009,
ure 74). There should be no conti-
Figure 69) (WP 0268).
nuity.
Connect P-C39 (WP 0009, Figure 70)
on Implement 1 ECM J2 (WP 0009,
Figure 71) (WP 0268).
Connect P-C45 (WP 0009, Figure 72)
on Implement 2 ECM J1 (WP 0009,
Figure 73) (WP 0268).
Connect P-C27 (WP 0009, Figure 74)
on Implement 2 ECM J2 (WP 0009,
Figure 75) (WP 0268).
Connect AF-C3 (WP 0009, Figure 51)
on P-C34 (WP 0009, Figure 52) (WP
0200).
Install rear front frame cover on
machine (WP 0224).
Connect AF-C6 (WP 0009, Figure 80)
on left AWD clutch forward solenoid
(WP 0009, Figure 81).
0013-62