TM 5-3805-293-23-1
0013
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0168-01 Electrical System
5. Using a digital multimeter, mea-
Resistance 5.0 Ohms or Greater -
Proceed to Test Step 4.
Voltage Low - Continued
sure resistance between P-C35
terminal 57 (WP 0009, Figure 53)
Resistance Less Than 5.0 Ohms -
and ground.
Proceed to Test Step 5.
Test Step 4. Inspect Ground Points
of Cab Lower Wiring Harness.
1. Inspect ground points of cab
Ground Point or Ring Terminal
lower wiring harness (WP 0009,
Dirty or Corroded - Clean as neces-
sary.
Figure 65) for dirt, corrosion, and
damage.
Install cab lower wiring harness termi-
nals on ground point with mounting
hardware and tighten securely. Pro-
ceed to step 2.
2. Using a digital multimeter, mea-
Resistance 5.0 Ohms or Greater -
sure resistance between P-C35
Replace cab lower wiring harness
(WP 0266).
terminal 28 (WP 0009, Figure 53)
and ground.
Proceed to step 5.
Resistance Less Than 5.0 Ohms -
Proceed to step 3.
3. Using a digital multimeter, mea-
Resistance 5.0 Ohms or Greater -
sure resistance between P-C35
Replace cab lower wiring harness
(WP 0266).
terminal 32 (WP 0009, Figure 53)
and ground.
Proceed to step 5.
Resistance Less Than 5.0 Ohms -
Proceed to step 4.
Resistance 5.0 Ohms or Greater -
4. Using a digital multimeter, mea-
Replace cab lower wiring harness
sure resistance between P-C35
(WP 0266).
terminal 57 (WP 0009, Figure 53)
and ground.
Proceed to step 5.
Resistance Less Than 5.0 Ohms -
Connect P-C35 (WP 0009, Figure 53)
on AWD ECM J1 (WP 0009, Figure
54) (WP 0270).
Proceed to step 5.
5. Using the MSD (WP 0006), select
0168-01 Code Active - Repeat trou-
All Wheel Drive 120M and verify
bleshooting code from the beginning.
0168-01 is not active.
0168-01 Code Not Active - Trouble-
shooting complete.
0013-14