TM 5-3805-293-23-1
0013
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0168-01 Electrical System
3. Turn battery disconnect switch to
Voltage Low - Continued
the ON position.
Voltage OK (18-24 Volts) - Proceed
to step 5.
sure for voltage between P-C35
Voltage Not OK (Less than 18
and ground.
Volts) - Replace cab lower wiring har-
ness (WP 0266).
Proceed to step 7.
Voltage OK (18-24 Volts) - Proceed
to step 6.
sure for voltage between P-C35
Voltage Not OK (Less than 18
and ground.
Volts) - Replace cab lower wiring har-
ness (WP 0266).
Proceed to step 7.
Voltage OK (18-24 Volts) - Proceed
to Test Step 3.
sure for voltage between P-C35
Voltage Not OK (Less than 18
and ground.
Volts) - Replace cab lower wiring har-
ness (WP 0266).
Proceed to step 7.
0168-01 Code Active - Repeat trou-
All Wheel Drive 120M and verify
bleshooting code from the beginning.
0168-01 is not active.
0168-01 Code Not Active - Trouble-
shooting complete.
Test Step 3. Test A201-BK
Unswitched Battery (-) Circuits in
Cab Lower Wiring Harness for High
Resistance Or Open.
1. Turn battery disconnect switch to
the OFF position.
Proceed to Test Step 4.
sure resistance between P-C35
Resistance Less Than 5.0 Ohms -
and ground.
Proceed to step 3.
Proceed to Test Step 4.
sure resistance between P-C35
Resistance Less Than 5.0 Ohms -
and ground.
Proceed to step 4.
Proceed to Test Step 4.
sure resistance between P-C35
Resistance Less Than 5.0 Ohms -
and ground.
Proceed to step 5.
0013-13