2
TM 5-3805-293-10
OPERATOR MAINTENANCE
-
CUTTING EDGES AND END BITS INSPECTION
0
019
Inspection
INITIAL SETUP
Estimated Time to Complete
Equipment Condition
0
0
Machine parked (WP 0005)
0.1 Hr
0
0
Blade tilted forward (WP 0004)
0
Blade lowered onto wooden blocks
0
INSPECTION
00019
1. Visually inspect cutting edges (Figure 1, Item 2), and end bits (Figure 1, Item 1) for damage or excessive wear.
2. Notify Field Level Maintenance if cutting edges or end bits are damaged or worn to within approximately 3/4 in.
(19 mm) (approximately the width of your thumb) of the blade.
Figure 1. Cutting Edges and End Bits.
00019
END OF TASK
END OF WORK PACKAGE
0019-1/(2 blank)