• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
ETHER STARTING AID CYLINDER REPLACEMENT
INSTALLATION

Operator Manual For Motorized Road Grader Model 120M
Page Navigation
  248    249    250    251    252  253  254    255    256    257    258  
img
TM 5-3805-293-10
0021
REMOVAL
00021
1. Loosen clamp (Figure 1, Item 2).
WARN I N G
Ether fuel is extremely flammable and toxic. DO NOT smoke, and make sure you are in a
well-ventilated area away from heat, open flames or sparks. Wear eye protection. Avoid
contact with skin and eyes and avoid breathing ether fumes. If fluid enters or fumes irritate
the eyes, wash immediately with large quantities of clean water for 15 minutes. Seek
medical attention immediately if ether is inhaled or causes eye irritation. Failure to follow
this warning may cause serious injury or death to personnel.
2. Unscrew and remove ether starting aid cylinder (Figure 1, Item 1) from valve (Figure 1, Item 3). Discard empty
cylinder IAW local regulations and Unit SOP.
3. Remove gasket from valve (Figure 1, Item 3). Discard gasket.
Figure 1. Ether Starting Aid Cylinder.
0021
END OF TASK
CLEANING AND INSPECTION
00021
Clean valve (Figure 1, Item 3) of any dirt or debris. Inspect valve for any damage. If damage is present, notify Field
Level Maintenance.
END OF TASK
0021-2


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.