POWER TRAIN
DISASSEMBLY AND ASSEMBLY
TM 5-3805-263-14&P-2
TRANSMISSION HYDRAULIC CONTROL VALVES
30. Put poppet (59) spring (61), and retainer
(60) in position in the cover.
31. Install snap ring (62) into the cover with
tool (A).
32. Put cover (64) in position on the pilot valve.
33. Install bolts (63). Tighten bolts (63) to a
torque of 22 ± 3 lb.ft. (3.0 ± 0.4 mkg).
NOTE: See ASSEMBLE TRANSMISSION for in-
stallation of transmission hydraulic control valves.
2-123
