POWER TRAIN
DISASSEMBLY AND ASSEMBLY
TM 5-3805-263-14&P-2
TRANSMISSION
DISASSEMBLE TRANSMISSION
start by:
a) remove transmission
1. Install the transmission on tooling (C).
Remove bolts (1) and the lockwashers that
hold the cover to the transmission. Remove
cover (2).
2. Remove links (3) from the transmission
hydraulic control valves.
3. Remove bolts (8) and plates (7). Move the
four sleeves (5) free of the transmission
hydraulic control valves.
NOTE: Do not remove bolts (4) and (6) at this
time. Bolts (4) and (6) hold the control valves to
the transmission.
4. Install a 3/8”-16 NC forged eyebolt in the
transmission case. Install tooling (B) in the
eyebolt.
5. Install tooling (A) on the transmission case
and on the control valves. Connect tooling
(B) to tooling (A) as shown. Remove bolts
(4) and (6). Remove transmission hydraulic
control valves (9) with tooling (B). Weight is
90 lb. (41 kg). See DISASSEMBLE HY-
DRAULIC CONTROL VALVES for dis-
assembly of the control valves.
6. Remove the four sleeves from the transmis-
sion. Fasten tooling (D) to the lifting eyes
on top of the transmission. Remove the
bolts that hold the transmission to tooling
(C). Remove the bolts and cover (10).
2-88
