TRANSMISSION CONT. - TM-5-3805-263-14P-2

TRANSMISSION CONT. - TM-5-3805-263-14P-2_354

TRANSMISSION CONT. - TM-5-3805-263-14P-2_356

TM-5-3805-263-14P-2 Grader Heavy Road Motorized Type I Nonsectionalized Type II Sectionalized Manual
Page Navigation
339

POWER TRAIN DISASSEMBLY AND ASSEMBLY 7. Install two 1/2”-13 NC forged eyebolts and two nuts in the transmission on top of the output flange. Fasten tooling (D) to the two eyebolts. 8. Turn the transmission on its end with tooling (D). Put the transmission in position on tooling (E). Remove tooling (D) and the eyebolts. 9. Remove O-rings ( 11) and O-ring (12) from the housing. 10. Remove bolt (13) and bolt (14) that hold the planetary transmission in the transmis- sion case. 1 1 . Install two 5/8”-11 NC forged eyebolts ( 15) in the housing. Fasten a hoist to the eyebolts. 12. Remove the planetary transmission from the transmission case. Weight is 560 lb. (254 kg). 13. Put the transmission on three blocks. WARNING: Make sure the input gear for the planetary transmission is on top of the blocks. If the input gear is not on top of the TRANSMISSION TM 5-3805-263-14&P-2 blocks, other components can fall out the bottom of the transmission when a retaining ring is removed. 14. Remove bolts (16). Remove O-ring seal (18). Lift housing (17) enough to remove springs (19) and plungers (20). Remove the housing. Weight is 85 lb. (39 kg). Remove the O-ring seal that is under the flange on housing (17). 2-89

Privacy Statement
Press Release
Contact