AXLES

CHAPTER 3 POWER TRAIN DISASSEMBLY AND ASSEMBLY

TM-5-3805-263-14P-2 Grader Heavy Road Motorized Type I Nonsectionalized Type II Sectionalized Manual
Page Navigation
291

POWER TRAIN DISASSEMBLY AND ASSEMBLY REMOVE AXLES AXLES TM 5-3805-263-14&P-2 Tools Needed 9S9152 Bearing Pulling Attachment A 1 1 1 2 3 5F7465 Puller Assembly 9S9155 Spacer 8S9191 Bolt 4B4278 Washer 4B4280 Washer 2 1. Remove the oil from the tandem housings and the bevel gear case to a level below the axles. 2. Remove bolts (2). Remove cover (1) and the gasket from the tandem housing. 3. Bend locks (4) away from bolts (5) that hold retainer (3). Remove the bolts. 4. Install two 3/8”-16 NC forcing screws in the retainer. Remove retainer (3) with forcing screws (6). 5. Install a 1/2”-13 NC forged eyebolt (7) in the end of the axle. Remove axle (8). 2-41

Privacy Statement
Press Release
Contact