2-35
TM 5-3805-263-14&P-2
GOVERNOR CONTROL LEVER AT:
PRESSURE TAP
PRESSURE
LOCATION
MINIMUM SETTING
MAXIMUM
ADJUSTMENT
PUMP
(A)
Add or remove spacers (29) in
Relief Valve Group
340 ± 10 psi (2335 ± 70 kPa)
relief valve. See spacer chart.
Selector lever in NEUTRAL
90 psi (620 kPa) Selector lever
90 psi (620 kPa) Selector
in NEUTRAL.
lever in NEUTRAL
(B) P1
SPEED CLUTCH
Transmission
Add or remove spacers (22) in
Control Group
320 psi (2200 kPa)
Minimum.
340 ± 10 psi (2335 ± 70 kPa)
modulating reducing valve.
Selector lever in FIRST
Selector lever in FIRST SPEED
See spacer chart.
SPEED FORWARD
FORWARD
(C) P2
Transmission
Note: Inspect the differential
DIRECTION
Control Group
250 psi (1720 kPa)
280 ± 5 psi (1935 ± 35 kPa)
check and safety valve. Install
CLUTCH
new valve and/or springs.
(D) P2
Selector lever in FIRST SPEED
Selector lever in FIRST
Transmission Cover
FORWARD AND REVERSE
SPEED FORWARD AND REVERSE
(E)
PI LOT
Transmission
96 psi (660 kPa) Selector
96 psi (660 kPa) Selector lever in
NONE
PRESSURE
Control Group
lever in NEUTRAL
NEUTRAL
10 ± 5 psi (70 ± 35 kPa)
80 ± 15 psi (550 ± 105 kPa) Selector
Selector lever in NEUTRAL
lever in NEUTRAL
(F)
Relief Valve Group
4 ± 1 psi (25 ± 7 kPa) Selector
60 ± 15 psi (415 ± 105 kPa) Selector
TRANSMISSION
lever in FIRST SPEED FORWARD
lever in FIRST SPEED FORWARD
LUBRICATION
NONE
OIL
53 ± 15 psi (365 ± 105 kPa) Selector
lever in NEUTRAL
(G)
Transmission Cover
40 ± 15 psi (280 ± 105 kPa) Selector
lever in FIRST SPEED FORWARD
