3304 VEHICULAR ENGINES
SPECIFICATIONS
TM 5-3805-263-14&P-2
FAN DRIVE GROUP
3P59
(1) Fill chamber between bearings half full of grease before
bolts are tightened.
FLYWHEEL
1W7610
(1) Ring gear
(2)
Chamfer side of ring year (1)
Install ring gear (1) on flywheel so that the chamfer side (2) of
ring gear (1) is as shown
NOTE: Do not heat ring gear to more than 320°C (634 °F) before
installing on the flywheel.
(3) Torque for flywheel
bolts. . . . . . . . . . . . . . .
205 ± 25 N•m (150 ± 20 lb. ft.)
FLYWHEEL HOUSING
2W3422
Tighten flywheel housing bolts in number
sequence to . . . . . . . . . . . . 100 ± 14 N•m (75 ± 10 lb. ft.)
(A) Timing bolt hole.
1-247
