3304 VEHICULAR ENGINES
SPECIFICATIONS
TM 5-3805-263-14&P-2
CRANKSHAFT GROUP
6N8080
(1)
Thickness of thrust plate with tabs (new):
7N9342 . . . . . . . . . . . . . . 5.461
± 0.038 mm (.2150 ± .0015 in.)
(2)
Tighten plugs to . . . . . . . . . . . . . . . . . . . . 23 ± 4 N•m (17 ± 3 lb. ft.)
T h e n “ s t a k e ” t h e c r a n k s h a f t t o h o l d p l u g s i n p l a c e .
“STAKE” use a center punch and a hammer to change the
shape of the holes as shown.
(3) Crankshaft gear:
Do not heat gear to more than 316°C (600°F).
(4)
End play for crankshaft
(new) . . . . . . . . . . . . . . . . . 0.064 to 0.368 mm (.0025 to .0145 in.)
Maximum permissible end play for
crankshaft (worn) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.64 mm (.025 in.)
(5)
Wear sleeve and seal installation:
Push wear sleeve and seal into position with correct tool-
ing.
CRANKSHAFT JOURNAL
WIDTH
40.475 + 0.140 - 0.064 mm
(1.5935 + .0055 - .0025 in.)
1-243
