ENGINE
TM 5-3805-263-14&P-2
REMOVE FAN DRIVE AND SUPPORT
1.
2.
3
4.
5.
6.
Remove the bolts and open the screen on the
radiator guard.
Install hoist on fan (3) and remove bolts (4)
that hold the fan and adapter to fan drive. Put
the fan in position on the baffle for the radiator
guard.
Remove bolt (1) and clip from tank. Disconnect
line (2) from fitting.
Remove the top four bolts (5) on the fan drive
assembly.
Loosen the bolts that hold the alternator in
position to remove the tension on the vee belts
(6). Remove the vee belts (6) from the engine.
Install a hoist on the fan drive and remove two
bolts (8) that hold the fan drive to the timing
gear cover. Remove fan drive (7) from vehicle.
DISASSEMBLY AND ASSEMBLY
FAN DRIVE AND SUPPORT
1-110
