ENGINE
DISASSEMBLY AND ASSEMBLY
ASSEMBLE WATER PUMP
WATER PUMP
TM 5-3805-263-14&P-2
NOTE: The seal must be installed with the lip
toward the bearings.
1. Install the lip type seal in housing with tooling
(A) to the bottom of the seal counterbore. Put a
thin layer of engine oil on the lip of the seal.
2. Use a press and tooling (A) to install bearing
(1) on shaft (2).
3. Install the shaft and bearing assembly in hous-
ing.
4. Install retaining ring (3) in housing with tool-
ing (B).
5. Use a press and tooling (A) to install bearing
(4) on gear (5).
1-107