ENGINE
DISASSEMBLY AND ASSEMBLY
TM 5-3805-263-14&P-2
FAN DRIVE
4. Install spacer (5) on bracket assembly with the
chamfer toward pulley.
5. Install pulley (6) on bracket.
6. Install the inner bearing and spacer (7) in the
hub.
7. Fill the area between the bearings in the hub
with multipurpose type grease. Install the
outer bearing (8) in hub with tooling (A).
8. Put multipurpose type grease on the lip of the
seal and install the hub assembly on the
bracket assembly.
9. Install washer, lock and bolts on the shaft.
10. Install O-ring seal (9).
end by:
a) install fan drive
1-114