TM 5380-263-14&P-3
DISASSEMBLY AND ASSEMBLY
STEERING PUMP
3. Remove seven bolts (7) and cap (6) from the
pump group.
4. Remove outer gear (12), spacer (11), inner gear
(10), drive (9) and spacer (8) from the pump body
(13).
5. Remove the spool and sleeve. assembly (16) from
body.
6. Remove race (15), bearing (14) and race (17) from
housing.
7. Remove pin (19) from sleeve assembly. Remove
spool (18) from sleeve (21). Remove springs (20)
from spool.
8. Remove spiral snap ring (24) from housing.
Remove bushing (23) and O-ring seal (22) from
housing.
9. Remove screw from location X.
3-168
