TM 5380-263-14&P-3
VEHICLE SYSTEMS
STEERING PUMP
10. Remove seals (25) from each side of bushing (23).
11. Remove seat (28), ball (27) and retainer (26) from
pump body.
ASSEMBLE STEERING PUMP
Tools Needed
A
1P510
Driver Group
1
1. Inspect the seals on seat
(3)
and
make
replacements if necessary.
2. Put retainer (1), ball (2) and seat (3) in position in
pump body. Install screw (4) in body. The screw
must be even with or below the mounting surface.
The screw must be tightened to a torque of 8 lb.ft.
(11 N.m).
3. Install seals in bushing (5) with tooling (A).
3-169
