TM 5-3805-263-14&P-3
HYDRAULIC SYSTEM & STEERING
CONSOLE FOR STEERING WHEEL
(6G4966)
(1) Torque for bolts (four) .......... 40 5 lb ft (55 7 N-m)
(2) Torque for bolts (four) .......... 40 5 lb ft (55 7 N-m)
Torque for nut on shaft to Install
steering wheel ................................ 45 5 lb ft (60 7 Nm)
DRAWBAR
(5R6342)
(1) Torque for bolts ......... 321 I 14.7 lb ft (435 20 N.m)
(2) Torque for bolts ........ 321 14.7 lb ft (435 20 N.m)
(3) ShimsUse shims as needed to obtain a maximum of
0.19 inch (.5 mm) clearance from the smallest gap at
each shoe.
(4) Running clearance between circle tooth and drive
pinion. +
.0937 + 2.5
Clearance .........................17.19 + .01937in (4.3 5 mm).
(5) Torque for bolts ............. 517 20 lb ft (700 27 N.m).
3-106A/(3-106B Blank)
