TM 5-3805-261-34
ENGINE MAINTENANCE. (cont)
13-8.
Piston and Connecting Rod. (Sheet 5 of 12)
REMOVAL (cont)
6.
Using a wooden dowel to prevent
damage to liner, push up items 3
thru 12 as an assembly (Figure
13-41).
7.
Remove items 3 thru 12 as an
assembly through top of cylinder
block.
8.
Install items 2 and 12 as an
assembly and two nuts (1) on
items 3 thru 12 as an assembly
(Figure 13-42) to prevent
possible mismatching during
installation.
NOTE
Repeat steps 3 thru 8 for
remaining connecting rod and
piston sets. Keep all sets
separated and identified.
CAUTION
Piston ring expander must be
used to remove rings. Use of
any other tool may result in
damage to piston lands.
9.
Using piston ring expander,
remove top piston ring (3),
second piston ring (4) and oil
ring (5) from piston (8, Figure
13-43).
10. Using retaining ring pliers,
remove two retaining rings (6).
11. Remove pin (7).
12. Remove piston (8).
Go to Sheet 6
13-44
Figure 13-43.
Figure 13-41.
Figure 13-42.