TM 5-3805-261-34
ENGINE MAINTENANCE.
13-4.
Crankshaft Assembly. (Sheet 4 of 5)
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Replace four plugs (2, Figure
13-12) on crankshaft (3).
2.
Heat crankshaft gear (1) to a
maximum temperature of 600
degrees F.
3.
Install crankshaft gear (1) on
end of crankshaft (3) with C mark
facing out and away from front of
crankshaft (3, Figure 13-13).
4.
Turn camshaft gear until C mark
on camshaft is positioned toward
C mark on crankshaft (3) when
installed.
Figure 13-13.
Go to Sheet 5 13-19
