TM 5-3805-261-34
ENGINE MAINTENANCE.
13-3.
Cylinder Head Assembly Overhaul. (Sheet 6 of 6)
INSPECTION/REPAIR
11.
Remove warpage of combustion
surface. Use milling machine,
table traverse 600 inches/minute,
down feed 0.001 inch/cycle,
grinding wheel per initial setup.
Make 0.010 inch rough cut, 0.005
inch finish cut. Check
thickness, refer to step 2.
Check flatness. Refer to step 3.
NOTE
Return 130G Grader to
original equipment condition.
End of Task
13-15
