TM 5-3805-261-34
ENGINE MAINTENANCE. (cont)
13-2.
Cylinder Block and Liners. (Sheet 4 of 7)
REMOVAL (cont)
11. Remove four bands (24) and 12 preformed packings
(25) from four cylinder liners (26, Figure 13-4).
(26) Discard 12 preformed packings (25).
12.
Remove four inserts (27) from block (28, Figure 13-5).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
NOTE
Perform steps 1 thru 5 if counterbore procedure has been done.
1.
Apply primer to counterbore area.
2.
Apply thin ring of retaining compound around edges of counterbore and along any
Figure 13-4.
Figure 13-5.
Go to Sheet 5
13-6
