EARTHMOVING EQUIPMENT COMPONENTS MAINTENANCE. (cont.)

EARTHMOVING EQUIPMENT COMPONENTS MAINTENANCE. (cont.) - TM-5-3805-261-34_817

EARTHMOVING EQUIPMENT COMPONENTS MAINTENANCE. (cont.) - TM-5-3805-261-34_819

TM-5-3805-261-34 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
771

TM 5-3805-261-34 EARTHMOVING EQUIPMENT COMPONENTS MAINTENANCE. (cont.) 12-8. Centershift Lock Control Valve Assembly. (Sheet 2 of 3) DISASSEMBLY 1. Remove pin (1), lever (2), two plungers (4) from valve body (12, Figure 12-28). 2. Remove and discard two preformed packings (3) from two plungers (4). 3. Remove two springs (5). 4. Remove two bolts (6), washers (7) and cover (8) from valve body (12, Figure 12-29). 5. Remove and discard two preformed packings (9). 6. Remove two springs (10) and valves (11) from valve body (12). CLEANING Clean all parts. Refer to Chapter 2. INSPECTION Inspect all parts. Refer to Chapter 2. Figure 12-29. Figure 12-28. Go to Sheet 3 12-36

Privacy Statement
Press Release
Contact