TM 5-3805-261-34
EARTHMOVING EQUIPMENT COMPONENTS MAINTENANCE. (cont)
12-9.
Circle Drive Swivel Assembly. (Sheet 3 of 3)
INSTALLATION
1.
Lubricate new seals (14 and 13) with hydraulic fluid and install on rotor (15, Figure
2.
Lubricate seven new preformed packings (11) and new seals (10) with hydraulic
(12, Figure 12-31).
3.
Using a press, install items 15 thru 13 as an assembly
4.
Lubricate four new preformed packings (9) with
5.
Install cover (8), four lock
washers (7) and
6.
Lubricate two new seals (5 and 4, Figure 12-30) with
7.
Install two new seals (5 and 4), shim (3), retainer
(12).
8.
Measure gap between retainer (2) and body (12).
shim(s) (3) to obtain required gap.
NOTE
Return 130G Grader to original equipment condition.
Figure 12-
Figure 12-
Figure 12-
End of Task
12-40
