HYDRAULIC SYSTEM MAINTENANCE. (cont)

HYDRAULIC SYSTEM MAINTENANCE. (cont) - TM-5-3805-261-34_663

HYDRAULIC SYSTEM MAINTENANCE. (cont) - TM-5-3805-261-34_665

TM-5-3805-261-34 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
617

TM 5-3805-261-34 HYDRAULIC SYSTEM MAINTENANCE. 10-4. Pump Assembly. (Sheet 21 of 23) ASSEMBLY 65. Install two guide rods in body (118, Figure 10-25). 66. Position head (95) on guide rods. 67. Install two lockwashers (62), bolts (61), three lockwashers (60) and bolts (59). 68. Remove two guide rods. 69. Install lockwasher (58) and bolt (57, Figure 10-24). 70. Install new preformed packing (56), cover (55), two lockwashers (54) and bolts (53). 71. Install spacer (52), spring (51), seat (50), three washers (49) and spring (48) in head (95, Figure 10-23). 72. Install new preformed packing (46) and plug (45) in housing (47, Figure 10-22). 73. Install two shim(s) (44), spring (43), retainer (42), piston (41), spacer (40), new preformed packing (39) and plug (38). 74. Install new preformed packings (37 and 36), spacer (35), piston (34), cover (33) and two bolts (32) to housing (47, Figure 10-21). Go to Sheet 22 Figure 10-25. Figure 10-24. Figure 10-23. Figure 10-22. Figure 10-21. 10-35

Privacy Statement
Press Release
Contact