TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENANCE.
10-5.
Circle Drive Motor. (Sheet 2 of 5)
DISASSEMBLY
NOTE
A hammer and blunt chisel may
aid in removal of cover (2).
Use care to prevent damage to
housing.
1.
Remove seven bolts (1), cover (2)
and preformed packing (3, Figure
10-59). Discard preformed
packing (3).
2.
Remove inner plate (4) and outer
plate (5) from sleeve (15).
3.
Remove and discard preformed
packing (6, Figure 10-60).
4.
Remove manifold (7) and plate
(8).
5.
Remove inner rotor (9), seven
pins (10) and outer rotor (11) as
an assembly.
6.
Remove plate (12).
7.
Remove bearing (13) and link
(14).
8.
Remove sleeve (15) and shaft (16)
from housing (28).
Go to Sheet 3
Figure 10-59.
Figure 10-60.
10-39
