TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENANCE. (cont)
10-5.
Circle Drive Motor. (Sheet 3 of 5)
DISASSEMBLY
9.
Remove seal (17) from housing
(28, Figure 10-61). Discard seal
(17).
10.
Using retaining ring pliers,
remove retaining ring (18).
11.
Remove spacer (19), washer (20)
and seal (21). Discard seal
(21).
12.
Remove bearing (22) and preformed
packing (23) from housing (28,
Figure 10-62). Discard preformed
packing (23).
13.
Using arbor press, remove bearing
(24), race (25), bearing (26) and
race (27) from housing (28,
Figure 10-63).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Go to Sheet 4
Figure 10-61.
Figure 10-62.
Figure 10-63.
10-40
