TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENANCE.
10-2.
Hydraulic Pump Drive. (Sheet 5 of 5)
INSTALLATION
1.
Apply anti-seize compound to pump
shaft before installing nut (5,
Figure 10-1).
2.
Install yoke (7), washer (6) and
nut (5). Tighten nut (5) to 125
to 145 ft-lb.
3.
Install items 22 thru 8 as an
assembly, four washers (4) and
bolts (3). Tighten four bolts
(3) to 35 to 45 ft-lb.
4.
Install four washers (2) and
bolts (1). Tighten four bolts
(1) to 35 to 45 ft-lb.
5.
Apply grease to all fittings in
drive assembly.
NOTE
Return 130G Grader to
original equipment condition.
End of Task
10-7
Figure 10-1.
