TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENANCE.
10-2.
Hydraulic Pump Drive. (Sheet 3 of 5)
DISASSEMBLY
1.
Remove four bolts (8), washers
(9) and items 10 and 22 as an
assembly (Figure 10-2) from drive
assembly.
2.
Remove four bolts (11), washers
(12) and items 13 and 21 as an
assembly.
3.
Unscrew retainer (18). Slide
retainer (18), washer (17), seal
(16) and washer (15) onto yoke
(14, Figure 10-3).
4.
Remove items 14 thru 18 as an
assembly (Figure 10-4).
5.
Remove washer (15), seal (16),
washer (17) and retainer (18)
from yoke (14, Figure 10-5).
Discard seal (16).
6.
Remove fitting (20) from yoke
(19).
7.
Remove fitting (21) from spider
(13).
8.
Remove fitting (22) from spider
(10).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter
2.
Go to Sheet 4
10-5
Figure 10-2.
Figure 10-3.
Figure 10-4.
Figure 10-5.