TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENANCE. (cont)
10-2.
Hydraulic Pump Drive. (Sheet 4 of 5 )
ASSEMBLY
1.
Install fitting (22) in spider
(10, Figure 10-5).
2.
Install fitting (21) in spider
(13).
3.
Install fitting (20) in yoke
(19).
4.
Slide retainer (18), washer (17),
new seal (16) and washer (15)
onto yoke (14).
5.
Install items 18 thru 14 as an
assembly into yoke (19, Figure
10-4).
6.
Install retainer (18), washer
(17), new seal (16) and washer
(15) onto yoke (19, Figure 10-3).
7.
Install items 21 and 13 as an
assembly, four washers (12) and
bolts (11, Figure 10-2). Tighten
four bolts (11) to 35 to 45
ft-lb.
8.
Install items 22 and 10 as an
assembly, four washers (9) and
bolts (8). Tighten four bolts
(8) to 35 to 45 ft-lb.
Go to Sheet 5
10-6
Figure 10-2
Figure 10-3.
Figure 10-4.
Figure 10-5.