TM 5-3805-261-34
REAR AXLE MAINTENANCE. (cont)
5-21.
Drive Axles. (Sheet 3 of 4)
REMOVAL (cont)
9.
Remove items 9 and 10 as an
assembly (Figure 5-121).
10.
Remove 1/2-13 forged eyebolt
(Figure 5-120).
Removal of washer from shaft
may cause destruction of
washer. Remove washer only
if inspection indicates
replacement is necessary.
11.
Inspect washer (9, Figure 5-122).
Replace if cracked, broken, worn,
grooved or scored.
12.
Using suitable puller, remove
washer (9), if necessary, from
shaft (10).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Using suitable driver and hammer,
install new washer (9, Figure
5-122), if removed, to right side
of tandem drive housing.
2.
Install shaft (10). Aline
splines of shaft (10) with
splines in final drive and
differential.
CAUTION
Figure 5-121.
Figure 5-120.
Figure 5-122.
Go to Sheet 4
5-98
