TM 5-3805-261-34
REAR AXLE MAINTENANCE.
5-21.
Drive Axles. (Sheet 4 of 4)
INSTALLATION
3.
Install new preformed packing (8)
on groove of retainer (7, Figure
5-119).
4.
Lubricate outer diameter of new
preformed packing (8) with clean
oil.
5.
Position retainer (7) on shaft
(10).
6.
Install five locks (6) and bolts
(5, Figure 5-117).
7.
Bend tabs over five bolts (5) and
locks (6).
8.
Install new gasket (4) and cover
(3).
9.
Install eight lockwashers (2) and
bolts (1).
10.
Refill differential and tandem
drive housings to proper level.
Refer to LO 5-3805-261-12.
NOTE
Return 130CG Grader to
original equipment condition.
Figure 5-119.
Figure 5-117.
End of Task
5-99