TM 5-3805-261-34
REAR AXLE MAINTENANCE.
5-21.
Drive Axles. (Sheet 2 of 4)
REMOVAL
NOTE
The following is a mainte-
nance procedure for the right
side drive axle. The mainte-
nance procedure for the left
side drive axle is identical.
1.
Remove eight bolts (1), lock-
washers (2), cover (3) and gasket
(4, Figure 5-117) from right side
of tandem drive housing. Discard
gasket (4). Remove all gasket
material from mounting surfaces.
2.
Bend five locks (6) away from
bolts (5).
3.
Remove five bolts (5) and locks
(6).
4.
Install two 3/8-16 forcing screws
to remove retainer (7, Figure
5-118).
5.
Remove retainer (7, Figure
5-119).
6.
Remove two 3/8-16 forcing screws
(Figure 5-118).
7.
Remove and discard preformed
packing (8, Figure 5-119).
8.
Install 1/2-13 forged eyebolt in
end of shaft (10, Figure 5-120)
to aid in removal.
Figure 5-117.
Figure 5-118.
Figure 5-119.
Figure 5-120.
Go to Sheet 3
5-97