TM 5-3805-261-34
TRANSMISSION MAINTENANCE. (cont)
5-4.
Transmission Control Lever and Housing. (Sheet 9 of 9)
INSTALLATION (cont)
23.
Install two nuts (27), washers (26) and bolts (25,
Figure 5-3).
24.
Install two mountings (24), spacers, (23), washers
(22) and bolts (21) through support (42).
25.
Position nut (20), washer (19), nut (18) and washer
(17, Figure 5-2).
26.
Position cables (16 and 15) extending up through
cab floor.
27.
Tighten nuts (20 and 18).
28.
Install nuts (14 and 13) and rod end (12) on cable
(16). Do not tighten nut (13).
29.
Install washer (11) and bolt (10).
30.
Tighten nut (13).
31.
Install nuts (9 and 8) and rod end (7, Figure 5-1).
Do not tighten nut (8).
32.
Install washer (6) and bolt (5).
33.
Tighten nut (8).
34.
Install new gasket (4), cover (3), three washers (2)
and bolts (1).
NOTE
Return 130G Grader to original
equipment condition.
End of Task
5-16
Figure 5-1.
Figure 5-2.
Figure 5-3.
