TM 5-3805-261-34
TRANSMISSION MAINTENANCE.
5-5.
Control Cables. (Sheet 3 of 8)
REMOVAL
11. Remove two nuts (22) and washers
(23, Figure 5-20).
12. Remove clip (24).
13. Remove plate (25) and clamp (26).
14. Remove two nuts (27) and washers
(28, Figure 5-21) from under left
front side of engine compartment.
15. Remove clip (29).
16. Remove plate (30) and clamp (31).
17. Disconnect cable (54) from
transmission modulation central
housing. Refer to paragraph 8-5,
TM 5-3805-261-20.
18. Remove two nuts (32) and washers
(33, Figure 5-22) from under
left, rear of cab.
19. Remove clip (34).
20. Remove plate (35) and clamp (36).
Go to Sheet 4
5-19
Figure 5-22.
Figure 5-20.
Figure 5-21.
